Dividing industrial paint bays without disruption
In 2025, Altitude Paint Services GmbH (APS) moved into a large hangar at Paderborn/Lippstadt Airport in Germany. The hangar, which covers approximately 4,000 square metres, has seen an investment of around two million euros to convert it into a premium facility for repainting aircraft and applying protective coatings and new liveries to commercial planes. To maximise throughput in such a large space, APS needed a way to divide the hangar into separate paint bays, allowing two planes to be worked on at the same time.
Westgate Global was recommended for its extensive experience in industrial partitioning and screening for the aerospace and airport sectors, an industry tightly bound by regulatory and safety compliance.
As well as ensuring that the aircraft look professional, the paints and coatings used by APS play a vital role in protecting the aircraft from corrosion. Aircraft coatings must meet strict aviation specifications, and dust contamination can cause a job to fail quality inspection altogether, resulting in costly reworks and expensive delays while aircraft are out of commission. APS needed a partitioning solution that would protect against the risk of microscopic dust particles becoming trapped between the substrate and coating; be suitable for the expansive hangar space; and withstand the wind and internal pressure caused by the opening and closing of the hangar doors.
18-meter-high Flexiwall with over 99% dust tightness
After a comprehensive survey and close collaboration with the team at APS to understand their exacting requirements, Westgate Global recommended a customised Flexiwall partition. Covering 18m in height and 50.5m in length, the suspended, modular fabric panels were fitted to the building’s existing steelwork, with no need for additional framework or scaffolding, ensuring a small footprint in an environment where every metre matters. The installation provided a sealed, engineered, and flexible way to divide the hangar into two aircraft spraying areas, without the disruption and structural complexity of a fixed wall.

The Flexiwall installation was designed and engineered specifically to provide an effective barrier against dust and contamination, without interfering with the paint shop’s extraction systems or airflow. Panels were joined using a unique V-overlap system and tensioned and secured to the hangar floor, creating an over 99% dust-tight seal around ducts, pipes, steelwork and at ceiling level. This design achieved an ISO clean room Grade 7 seal, protecting both the finish quality and the long-term structural safety of the aircraft. Although the partition was inside the building, the panels needed to withstand wind when the hangar doors were opened. Westgate Global’s technical team carried out wind load calculations and added bespoke wind load straps designed to protect the installation.
